Battery Eliminator AC/DC 12V 2A
Product Code : SCL-PLE-11847
Quick Answer: The Battery Eliminator AC/DC 12V 2A gives low-voltage AC and DC from separate socket pairs, switchable in steps of 2, 4, 6, 8, 10 and 12 V and rated at 2 A, for transformer, coil and semiconductor experiments.
Last updated: 18 October 2026
Key Features
- Dual output: one pair of sockets for AC and one for DC.
- Voltage steps of 2, 4, 6, 8, 10 and 12 V.
- 2 A continuous rating in both AC and DC modes.
- Full-wave silicon bridge rectifier for the DC output.
- Thermal overload protection and a primary glass fuse.
Technical Specifications
| Specification | Value |
|---|---|
| Input | 220–240 V AC, 50 Hz |
| Outputs | AC and DC |
| Voltage steps | 2, 4, 6, 8, 10, 12 V |
| Current rating | 2 A continuous, AC and DC |
| DC rectification | Full-wave silicon bridge |
| Voltage selection | Rotary switch with positive detent locking |
| Output terminals | Two pairs of 4 mm safety-shrouded sockets (1 AC, 1 DC) |
| Protection | Thermal overload, primary glass fuse |
How It Is Used
The voltage is set on the rotary switch and the experiment is connected to either the AC or the DC socket pair. AC suits transformer work, while DC suits semiconductor biasing, and the 2 A rating is enough to drive electromagnetic coils and lamp banks.
Frequently Asked Questions
Does the Battery Eliminator AC/DC 12V 2A give both AC and DC?
Yes. It has one pair of 4 mm sockets for AC and one for DC, each rated at 2 A, with the DC produced by a full-wave bridge rectifier.
Related Physics Lab Equipment
See the full physics lab equipment range, or these related laboratory power supplies:
- Battery Eliminator 2-12V 2A
- Battery Eliminator (Socket Type)
- Step Down Transformer (2-12V) 2A AC
- IC Regulated Battery Eliminator 1.5-12V 2A
- IC Regulated Power Supply 30V 1A
For a quotation on the Battery Eliminator AC/DC 12V 2A, contact JLab India on +91-8569909696.
.jpg)
.png)